Hanna Instruments PP pH-Analyse Elektrode zum Messen von Leitfähigkeit, pH, gelöste Feststoffe, 0 → 60 °C

Mehr Infos und technische Dokumente
Rechtliche Anforderungen
RoHS Status: Nicht zutreffend
Ursprungsland: RO

Multi-Parameter, Single Probe Water Testers

These portable meters are for field measurement of pH, conductivity and TDS. With a choice of 3 measurements.

Built within a rugged housing for extra durability in the field
Simple calibration - one point for both pH and conductivity/TDS modes
One replaceable probe used for all measurements - no need to switch probes for measurement mode changes
Automatic temperature compensation
Battery low indicator

EC/TDS conversion factor 0.5ppm = 1μ S/cm
Calibration Manual 1 point through trimmer for all parameters
Temp. compensation Automatic from 0 to +50 °C with ß of 2% per °C
Probe pH/Conductivity/TDS probe with DIN connector and 1m cable (included)
Battery type/life 1 x 9V (supplied) / 150hrs (continuous use)
Environment 0 to +50 °C 95% RH
Dimensions 185 x 82 x 45mm (Weight 520g)


Probe is supplied and is stainless steel, not plastic as shown.


probe; pH7 buffer (20ml); EC and TDS calibration solutions (20ml each); 9V battery; instruction manual.

Technische Daten
Eigenschaft Wert
Messbereich 0 → 60 °C
Elektrodentyp Gelöste Feststoffe, Leitfähigkeit, PH
Material Gel
Prüfsonden Typ PP
Funktionen Gelöste Feststoffe, Leitfähigkeit, PH, Temperatur
Schnittstellentyp DIN
Voraussichtlich ab 24.10.2019 verfügbar.
Preis pro: Stück
Vorher 141,31 €
(ohne MwSt.)
(inkl. MwSt.)
Pro Stück
1 +
113,28 €
Nicht als Expresslieferung erhältlich.